A fixed price is not a fixed cost. When the National Audit Office looked at government consultancy, 57% of contracts let through Crown Commercial Service agreements were fixed-price, and suppliers said those contracts “were often extended when the fixed price was reached” (NAO, 2016).

The price on the proposal is the least important number in a consulting agreement. Three clauses decide what you actually pay: acceptance, change control and termination. Get those right and the day rate holds. Get them wrong and it does not matter what you negotiated.

Download the consulting agreement template (Word, free). It is written for a UK business buying consulting for a defined project: 20 clauses, a statement of work, a rate card and a data-processing schedule. The rest of this guide reads the twelve clauses that matter from the buyer’s side: what the law says, what the UK government writes into its own consultancy contracts, and what to change before you sign.

Warning
A template, not legal advice

The template assumes a business buyer in England and Wales and a defined project. Fill in every bracket, delete what you do not need, and have a solicitor review it before you sign anything material. If you are buying in the US, read the US notes near the end first.

Consulting agreements by the numbers

57% of government consultancy contracts let through CCS agreements were fixed-price, and often extended when the price was reached NAO, 2016
11.75% statutory interest on late business payments where interest starts July to December 2026 (8% plus 3.75% base rate) Late Payment Act 1998; Bank of England
£5m professional indemnity cover the government requires of management consultancies, kept for six years after the contract MCF4 (RM6309)
90 days notice a government buyer needs to end a consultancy contract without giving a reason MCF4 core terms

Where the template comes from

The UK public sector is one of the biggest buyers of consulting in the country: it paid UK consultancies an estimated £4.6 billion in 2024, on Management Consultancies Association figures quoted by the NAO. And it publishes its contracts. Its Short Form Contract covers low-value, simple services. The call-off terms of its Management Consultancy Framework, RM6309, cover consultancy from 219 suppliers across ten lots until July 2027. Crown Commercial Service, which ran both, became the Government Commercial Agency on 1 April 2026.

GOV.UK publishes the Short Form Contract under the Open Government Licence, which lets anyone adapt it with attribution. Both documents are long: the Short Form Contract alone runs to 76 pages. Our template keeps the protections a private buyer needs, in plain English, on ten pages. Where a clause below quotes the government’s terms, that is the benchmark to negotiate towards.

1. Scope, deliverables and acceptance: define “done” before you pay

By law, a consultant owes you “reasonable care and skill” (Supply of Goods and Services Act 1982, s.13). That is a duty to try, not a duty to deliver. The outcome you are paying for exists only if the contract names it.

So the statement of work (SoW) does the heavy lifting. Every deliverable needs written acceptance criteria, and payment should follow acceptance, not delivery. The government’s consultancy terms require deliverables to “comply with the Specification”, let the buyer “withhold payment for partially or undelivered Services”, and give “a warranty of at least 90 days from Delivery against all obvious defects”.

Keep the acceptance window short. Under the Late Payment of Commercial Debts (Interest) Act 1998, an acceptance procedure that runs past 30 days is treated as complete at day 30, unless you expressly agree a longer period that is not grossly unfair to the supplier. The template gives you ten business days to accept or reject, with reasons.

2. Change control: the clause that decides your final bill

Most overspend arrives as a change nobody priced. Projects drift: in PMI’s 2018 survey of 5,402 project professionals, 52% of projects completed in the previous year had scope creep or uncontrolled changes, up from 43% five years earlier (PMI). That covers projects of every kind, not only consulting, but the mechanism is the same.

The fix is a change-control clause with three parts:

  • Writing. No change is effective unless both parties sign it. The Supreme Court upheld clauses requiring this in Rock Advertising v MWB (2018).
  • An impact assessment first. The government’s terms require the cost of the change and a timetable before anyone agrees it.
  • No payment for unapproved work. Without this, the law fills the gap: where no price is agreed, you owe “a reasonable charge” (s.15).

The government’s terms also say the buyer is “not required to accept a Variation request made by the Supplier”. Keep that line.

3. Fees, rate card and expenses: no risk uplift, no surprise expenses

Pick the pricing model before you read the rate. The Cabinet Office’s Consultancy Playbook suggests time and materials while scope is unclear, and a fixed price “further along the project lifecycle”. If you buy time and materials, put a cap on it.

Two lines in the government’s framework rate card are worth copying. Suppliers may not include “any uplift for risks or contingencies within its day rates”. And expenses are recoverable only where the order form permits them and they are “supported by Supporting Documentation”. The template does the same: rates include all costs and risk, and expenses need approval in advance and receipts.

Our consulting rate card template shows what a supplier’s rate card should contain. Our management consulting fees guide shows what the public record says each type of project costs.

4. Invoicing and payment: 30 days, and what paying late costs you

The government pays valid, undisputed invoices within 30 days. For public bodies that is now law: Procurement Act 2023, s.68. Thirty days is a fair term for a private buyer too, and it is what the template uses.

Pay late and the consultant can claim statutory interest at 8% above the Bank of England base rate. With base rate at 3.75% since 18 December 2025, that is 11.75% for interest that starts between July and December 2026. They can also claim fixed compensation of £40, £70 or £100 per invoice, depending on its size (s.5A). You cannot contract out of that unless the contract gives “a substantial contractual remedy for late payment” (s.8).

Two more lines protect you. Pay the undisputed part of a disputed invoice on time. And require every invoice to show the deliverables or days it covers, with timesheets, so you are approving work, not totals.

A Commercial Payments Bill that would cap large firms’ payment terms to small suppliers at 60 days is going through Parliament. It is not law yet.

5. Intellectual property: you do not own what you paid for unless it is assigned

This clause surprises more buyers than any other. Under the Copyright, Designs and Patents Act 1988, the author of a work owns its copyright. An employer owns its employees’ work, but you are not the consultant’s employer. Without a written assignment, signed by the consultant (s.90(3)), the consultant owns the strategy deck, the model and the code you paid for.

The government’s consultancy terms get this right: “Any New IPR created under a Contract is owned by the Buyer”, and the supplier may use it only “for the purpose of fulfilling its obligations during the Contract Period”. Its short-form contract is weaker by default. It lets the supplier use the new IP for “commercially exploiting the New IPR developed under the Contract”, which means your work can become the consultant’s product.

The template assigns new IP to you as it is created, gives you a permanent licence to anything the consultant already owned that sits inside the deliverables, and limits the consultant’s licence back to doing your project.

6. Confidentiality and data protection: decide who is the controller

A standard confidentiality clause is not enough once personal data is involved. If the consultant processes personal data for you, Article 28 of the UK GDPR requires a contract that limits processing to your “documented instructions” and bans sub-processors without your written authorisation.

Check the role first. The ICO’s guidance on controllers and processors treats an IT services firm working to your instructions as a processor, but an accountant acting for you as a controller. A consultant who decides what data to collect and why may be a controller too. The template includes the Article 28 terms and a schedule to fill in. Delete them if no personal data changes hands.

7. AI tools: say where your data may go

None of the government’s model contracts has an AI clause yet. Its procurement guidance does. Procurement Policy Note 017 suggests requiring suppliers to declare where they will use AI, and offers a contract term that client data is “not used for training purposes unless this has been specifically agreed and approved in writing by the client”.

The template turns that into four lines. The consultant declares the AI tools it will use. It puts your confidential or personal data only into tools you have approved, on terms that stop the provider keeping it or training on it. It never trains a model on your data without your agreement. And it stays responsible for the accuracy of the deliverables, however they were produced. For AI projects themselves, our guide to hiring an AI consultant covers the extra SoW clauses.

8. Liability and insurance: match the cap to what can go wrong

Every consultancy contract caps liability, and you cannot exclude liability for death or personal injury caused by negligence (Unfair Contract Terms Act 1977, s.2). The question is where the cap sits.

The government’s benchmarks:

ContractLiability capProfessional indemnity
Short Form Contract125% of the charges; the guidance says it “should not be reduced""Adequate insurance cover”
Management Consultancy Framework (RM6309)The greater of £5 million or 150% of the estimated yearly charges£5 million, kept for six years after the contract ends

G-Cloud 14, the government’s framework for cloud and digital services, asks for at least £1 million of professional indemnity for each claim. If a consultant’s terms cap its liability at the fees or less, push back: for advice a business decision rests on, that is low. The template starts at 125%, keeps IP, confidentiality and data-protection claims outside the cap, and asks for professional indemnity cover sized to what a mistake could cost you.

9. Termination: write in your right to stop

A private buyer has no automatic right to end a consulting contract early because the work is no longer needed. If you want that right, it must be in the contract.

The government gives itself 90 days’ notice “without reason”, and in return pays outstanding charges plus “reasonable committed and unavoidable Losses”, capped at what the contract would have paid anyway. That is a fair trade. The template uses 30 days, which suits a project measured in months, with the same cost cap. It also requires the consultant to hand over all work in progress at no extra cost, so ending the contract does not mean starting again.

10. Key personnel and substitution: name the people, mind IR35

You hired a firm because of the people in the pitch. A key-personnel clause keeps them on your project. The government requires three months’ notice before a supplier replaces key staff, and lets the buyer remove anyone it “considers in any respect unsatisfactory” at no cost.

There is one catch when the consultant is a single person working through their own company. HMRC looks at whether the right to send a substitute is genuine: “if the engager has an unlimited right to veto substitutes then this may mean that the reality is the worker has to provide the services personally” (HMRC, ESM0530). A strict named-person clause plus a veto points towards employment for tax purposes. Use the clause for firms. For an individual, read the next section first.

11. IR35: decide whose job the status call is

Since April 2021, a medium or large private-sector client that engages someone through their own company has to decide their employment status for tax and give a status determination statement with reasons (HMRC). If the client fails to take reasonable care, the statement does not count, and the tax risk moves to the client.

Small clients are exempt: the worker’s company decides instead. “Small” follows the Companies Act tests, meeting two of three. The thresholds rose for financial years beginning on or after 6 April 2025, to £15 million turnover, £7.5 million balance sheet and 50 employees. HMRC says that for a usual 12-month financial year the change first affects the 2027/28 tax year (ESM10006A). For 2026/27, most clients still use £10.2 million and £5.1 million.

HMRC’s CEST tool gives its view of status, and HMRC stands by the result if the information is accurate. The template states that the consultant is independent and responsible for its own tax, and that you will issue a status determination where the rules apply.

12. Non-solicitation and disputes: keep both short

Consultancies ask you not to hire their staff. The Competition and Markets Authority says such clauses may be lawful if they are necessary and proportionate, and their “duration, subject matter and geographical scope do not go beyond what is reasonably required”. Make yours mutual, limit it to people who worked on the project, and keep it to six months. Or replace it with a fixed fee if you want to hire someone.

For disputes, start with a meeting of senior people, then mediation. It works: CEDR’s 2025 mediation audit puts the settlement rate at 87% across about 21,000 commercial cases a year. The government’s terms add one line worth copying: the supplier “cannot suspend the performance of a Contract during any Dispute”.

Write the three numbers the work should move into the SoW, and the week each one gets measured. A deliverable you cannot measure is a deliverable you cannot reject.

Callum Brodie Operations Editor, ConsultingDemand

What goes wrong when these clauses are missing

The government’s own record is the best evidence, because it is published.

  • Unclear scope. In the NAO’s 2016 review, only 16% of suppliers thought government tender documents had improved, while 65% disagreed, and “departments often could not clearly articulate their objectives”.
  • Fixed prices that grow. Suppliers told the NAO that contracts “were often extended when the fixed price was reached”.
  • No data on use. In November 2025 the NAO found that “the government does not collect data on how it uses consultants, only what it spends” (NAO, 2025). Officials it surveyed named “clear scope and requirements” as the top factor in successful contracts, and it recommended building knowledge transfer into contracts.
  • Spend nobody can see. In March 2026 the Public Accounts Committee put central government’s consulting spend somewhere between £1.34 billion and £2.23 billion, and said the Cabinet Office “does not have a grip” on it (PAC).

Each of those is a contract problem before it is a delivery problem. Scope, acceptance and change control are written before the work starts, or not at all.

If you are buying in the US

The template is written for England and Wales. Four US differences matter most:

  1. IP. Under 17 U.S.C. §101, a contractor’s work is a “work made for hire” only in nine listed categories and with a signed agreement. Strategy reports and most software sit outside them, so you need a written assignment, as in the template.
  2. Worker status. The IRS weighs behavioural control, financial control and the type of relationship. California applies the stricter ABC test.
  3. Trade secrets. The Defend Trade Secrets Act requires a whistleblower-immunity notice in contracts with contractors and consultants that govern confidential information. Without it you lose exemplary damages and attorney fees (18 U.S.C. §1833).
  4. A free US template. Common Paper’s Professional Services Agreement was drafted by a committee of attorneys from both sides and is free to use and modify under CC BY 4.0. Watch its deemed-acceptance clause: a deliverable counts as approved if you do not reject it within the rejection period.

Before You Sign: Ten Questions to Ask

Consulting agreement checklist

Area Minimum Upgraded
0 of 8 complete

Ask these before you sign. If the consultant cannot answer one, do not sign until they can.

  1. What exactly is out of scope, in writing?
  2. What are the acceptance criteria for each deliverable, and who signs them off?
  3. How is a change priced, and what happens if we do not sign the change note?
  4. Is this a fixed price, or a time-and-materials budget with a cap?
  5. Do the day rates include every cost, or will expenses and contingency appear on the invoice?
  6. Who owns the work when we have paid for it, including the models, prompts and code?
  7. Which AI tools will you use, and where will our data go?
  8. What is your liability cap, and what professional indemnity cover do you hold?
  9. What does it cost us to stop the work in month two?
  10. Who are the named people, and what happens if one of them leaves?
Key Takeaways
  • Three clauses decide what you pay: acceptance, change control and termination. The day rate matters less than any of them
  • Keep acceptance inside 30 days and pay only after written acceptance
  • No change without a signed change note and an impact assessment; the law otherwise lets the consultant charge a reasonable sum
  • You do not own the work you paid for unless the copyright is assigned to you in writing
  • Paying late costs 11.75% interest in late 2026, plus £40 to £100 per invoice
  • Write in a right to end the contract for convenience: a private buyer has none by default
  • If you hire an individual through their own company and you are not small, you must decide their IR35 status
Helen Okafor Rates & Contracts Editor, ConsultingDemand

Covers what consulting costs and how to buy it without regret. Reads the rate card before the proposal, and the change-control clause before either.